Looking for a Multi-Engine or Mult-Instrument Rating?
JetPro is also offering flight instruction toward a Multi-Engine Rating and Group One Instrument Rating in our DA62 Aircraft.
Your instructors is a highly qualified and experienced airline pilot. The program itself has been developed using airline/military training models.
Whether the endorsement is multi-engine (ME) or multi-engine IFR (MIFR), the initial phase is the multi-engine training. This involves learning the DA62 and multi-engine flight.
Ground School > Procesdures Trainer > Aircraft
The focus of the instrument training is the Garmin 1000NXi. This popular avionics package is found on many entry level aircraft. The principles of operation of the Garmin 1000NXi are applicable to other Garmin avionics suites such as the Garmin 430/530, GTN 650/750, and others found in entry level commercial aircraft.
One unique characteristic of the Garmin 1000 is the airline-like flight mode annunciator (FMA) – learning how to effectively use this feature properly from the beginning with instruction from an experienced airline pilot will make your life a lot easier and safer, whether you are flying privately or commercially.
If you want "cheap and quick" training this is not for you
Instrument flying is the bread and butter of commercial pilots - it is a skill that should be taught properly the first time. Moreover, whether you are a private pilot or commercial pilot, instrument flying can be both enjoyable and lethal - many accidents have occurred during IMC conditions while performing instrument approaches and departures. The time and money investment in a high quality professional training experience with modern aircraft and avionics and experienced aviators pays dividends.
The heart of IFR training is the avionics. JetPro flight training uses the Garmin G1000 NXi throughout its training including the procedures trainer and aircraft.
Simulator time and aircraft time are expensive. To maximize the value of those resources a procedures trainer can be used to learn the use of the avionics as well as the aircraft operation before stepping into the aircraft.
JetPro has purchased a desktop training device (Aviatek G1000 Desktop Trainer) that focuses exclusively on the Garmin 1000 NXi. This device is used with Microsoft Flight Simulator 2020. While no flight credits can be gained with this device, learning how to use the avionics in this environment saves time and money when progressing to more advanced training.
JetPro uses a state-of-the-art, new Diamond DA62 aircraft. It’s little brother, the DA42, is a popular multi-engine, IFR training aircraft. The DA62 offers a number of features that make it attractive for this training:
Large wingspan - making it a very stable IFR platform
Garmin G1000NXi avionics
Single lever throttle control allowing one to focus on flying the aircraft not managing the engines.
Lots of room for observer in the rear seat
Bluetooth connectivity to the observer to follow along
Fast transit times - allowing approaches and departures to more airports
Real engine shutdowns are easily demonstrated
Datalogging flights for post flight debriefing
JetPro uses advanced technology to enrichen the training experience to produce a better trained and safer multi-engine/instrument rated pilot. Some of these innovations are:
Aviatek Procedures Trainer (as described earlier)
ICARUS - This device allows the instructor to simulate obscured visibility providing a more realistic training experience. This is what would be experienced in real world instrument flying.
The Garmin G1000 NXi data logs a variety of parameters during the course of a flight; this data can then be used to debrief flights to understand how future performance can be improved. The following demonstrates this capability on a recent flight from High River, Alberta (CEN4) to our base, CFB6:
JetPro is based at the Edmonton/Josephburg Airport (CFB6), five minutes from Fort Saskatchewan and twenty-five minutes from Edmonton.
Josephburg offers several unique advantages:
Uncontrolled aerodrome – few ATC restrictions and the opportunity to practice radio procedures at an uncontrolled aerodrome.
Proximity to controlled airspace – training can be done in controlled airspace when desired as CFB6 is located on the edge of the Edmonton terminal area.
Nearby ILS at Edmonton/Villeneuve (CZVL)
Training areas nearby – no need to transit to a training area as it begins within minutes after take-off.
Instrument approaches – CFB6 has RNAV approaches so no transit is required.
Nearby airports with instrument approaches – many airports located near CFB6 have instrument approaches with minimal transit time. Practicing approaches, missed approaches and departures at a variety of airports adds value compared to never leaving the local area. With the DA62’s relatively fast transit speed, this can be done efficiently.
The primary instructor is Ed McDonald. Ed began his instructional experience many years ago with the RCAF as a CT-114 Tutor Jet instructor, achieving an A2 instructional category with almost 800 hours of military jet instructional experience and over 300 hours of simulator instructing experience.
Since then, Ed completed a 32-year airline career retiring as a Boeing 787 Captain with endorsements on the Boeing 737-200, Boeing 767, Boeing 777 and Airbus A340/330.
Ed formed JetPro and has been actively involved in instrument flight procedure design across Canada as a qualified procedure designer.
All of these unique experiences provide a unique set of skills in flight instruction, airline and aircraft operations and instrument procedure creation.
The multi-engine program only is approximately nine hours of flying whereas the multi-IFR program is approximately thirteen hours of flying plus ground briefings. Time will vary between students.
The training is structured for a single student; however, we can accomodate two students simultaneously - with the additional student observing the instruction.
Double the experience for the same cost
Two students at time allowing for continuous training and reduced time frame and hours (dollars) to complete the training
JetPro flight training program is unique in may ways. This includes:
Detailed explanation of the construction of instrument flight procedures from qualified and experienced procedure designers. To many, instrument flight procedures are a mystery in how they are created. This mystery is revealed in the ground school portion of the program where the instrument flight procedure design is explained in conjunction with the lessons about the instrument procedures themselves and the charting.
The Diamond 62 has an airline-like Flight Mode Annunciator (FMA). This is one of the most critical displays on the instrument panel and a source of many errors both in training and on the flight line. With an airline like training program, bad habits will be avoided through the proper training and use of the FMA.